-
DAYS
-
HOURS
-
MINUTES
-
SECONDS

5%Off for online orders!

Coupon: ONLINE

Aero Centurion D2 Turbo Motor for Sliding Gate Automation

, ,

Aero Centurion D2 Turbo Motor for Sliding Gate Automation

From $1,225.00

SKU: MT55162240 Categories: , ,
Guaranteed Safe Checkout

Description

Aero Centurion D2 Turbo Motor for Sliding Gate Automation
Prepare for your sliding gate to be turbocharged. The D2 Turbo is a high-speed, cost-effective operator for domestic gates weighing up to 250kg, with a maximum speed of 400 millimetres per second and powerful peak push force rated at 9kgf. This operator is exceptionally quick and easy to install and set up, with all settings easily configurable via two dials on the controller. With loads of features, the D2 Turbo is the complete motor for a standard, domestic four metre gate.
Gate mass – maximum 250kg

D2 TURBO TECHNICAL DATA:
DESCRIPTION
Technical Data D2 Turbo D2 Turbo Low-voltage
Input voltage 1 90V– 240V AC ±10%, 50Hz 10V – 20V AC ±10%, 50Hz; 10V – 28V DC
Motor voltage 12V DC 12V DC 3
Motor power supply 4 Battery-driven (standard capacity – 12V 5Ah) Battery-driven (standard capacity – 12V 5Ah)
Current consumption (mains) Intergral with controller 1A @ 13.7V +/- 1% Intergral with controller 1A @ 13.7V +/- 1% (Input voltage > 15V AC)
Current consumption (motor at rated load) 8/12A 8/12A
Current consumption (quiescent load) 95mA 95mA
Operator push force
Starting 18kgf 18kgf
Rated 8kgf 8kgf
Gate mass – maximum 250kg 250kg
Gate length – maximum 20m 20m
Gate speed – m/min 6 22 – 26m/min 22 – 26m/min
Gate speed – mm/sec 367 – 433mm/sec 367 – 433mm/sec
Drive Pinion 17T Module 4 17T Module 4
Maximum daily cycle 10 cycles/day 10 cycles/day
Design life 30 000 cycles 30 000 cycles
Operations in standby with standard battery 4, 5
Half day 60 cycles 60 cycles
Full day 40 cycles 40 cycles
Collision sensing Electronic Electronic
Operating temperature -15°C to +50°C -15°C to +50°C
Degree of protection IP54 IP54
Controller incorporated D2 Controller_H D2 Controller_L
Onboard receiver type NOVA code-hopping onboard, multichannel NOVA code-hopping onboard, multichannel
Receiver frequency 433.92MHz 433.92MHz
Receiver code storage capacity 32 transmitter buttons 32 transmitter buttons
Mass of unit packed 5kg 5kg
Packaging dimensions Length: 255mm x Width: 188mm x Height: 333mm Length: 255mm x Width: 188mm x Height: 333mm

1. Can operate off a solar supply, consult Centurion Systems for assistance on the requirements of individual installations
2. Plug-in transformer
3. Solar panel
4. Can increase battery capacity for longer standby times
5. Based on 4m gate with no external accessories such as infrared Safety Beams
6. Gate operating speed can be configured to run at a slower, 16m/min, depending

 

 

Additional information

Product Type

Automation, Single Sliding/Swing Gates

Motor type

D2 TURBO, D2 TURBO LOW-VOLTAGE

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Aero Centurion D2 Turbo Motor for Sliding Gate Automation”

Your email address will not be published. Required fields are marked *

Shopping Cart
D2 turbo motorAero Centurion D2 Turbo Motor for Sliding Gate Automation
From $1,225.00Select options